| Product name | Edge banding tape |
| Material | pvc,abs,pmma,acrylic,environment friendly materials according to your requirement |
| Specifications | width:9mm-120MM thickness: 0.25mm-4MM |
| surface | olid color collection,woode grain collection,embossing collection,glossy surface collection,linen pitted surface |
| MOQ | 3000 meters per color |
| Packing | 0.25mm-1mm:200 meters/roll |
| 0.5mm-2mm:100 meters/roll | |
| 2mm-3mm:500 meters/roll | |
| or according to your requirements | |
| Delivery time | about 15-20 days after receiving 30% deposit. |
| Payment terms | T/T,L/C,D/A,D |
| Supply ability | 500000m per day. |
| Temperature | high temperature and low temperature resistant |
| Feature | Masking paper tape with water-based rubber,soft and fit,
No residue,high adhesion,easy to tear,can be written on. |
Edge banding tape is a kind of adhesive specially used for edge banding of man-made panels. It is a solvent-free thermoplastic adhesive.
Types of edge banding tape
EVA (B*-vinegar*B* copolymer resin) base material hot melt adhesive, this kind of hot melt adhesive can be divided into two types with filler and without filler. Using EVA as the base material is the most common furniture edge banding production technology, and its main limitation is poor heat resistance.
The ambient temperature of panel furniture sealed with EVA hot melt adhesive cannot be higher than 120°C;
this hot melt adhesive has good heat resistance and fast curing characteristics, the main disadvantage is that it is expensive.
HMPU (Polyurethane) base material hot melt adhesive, it is the best type of hot melt adhesive, it is the guarantee of high-quality sheet edge sealing. It is expensive and requires special methods of use. The requirements for hot melt adhesives, white latex, etc. adhesives are not high; flat and rolling adhesives can be used in the market to choose adhesives; if hot melt adhesives are used as adhesives, the melt glue control temperature is 120℃～160℃, The pressure is 4-6/2, the curing time is 20-50 seconds, and the ambient temperature is 15°C for indoor pasting. In view of the fact that the edge banding tape has stronger permeability to hot melt adhesive than PVC, the amount of glue coating should be reduced when it is pasted with the board, generally within the range of 6-8g/linear meter.
